Welcome to Amerapure
We are a growing company with a goal to provide you with one of the best full house water filtration systems on the market.
Our filter systems feature 1-inch IP inlet and outlet ports reinforced with brass to prevent any splitting on the housing. The cylinder filter housings feature a double o-ring for extra leakage protection and one oil-filled pressure gauge per filter. Our standing filter units can be floor or wall mounted.
Included Filters
SED – Pleated Polypropylene 5 Micron Sediment Filter
The first step in our water filtration system. This removes solid particles like rust, sand, dirt, and fine particles like sediment, silt, and limescale. This prevents the contamination of the following filters. Pleated to maximize surface area for efficient water filtration and overall longevity, up to three times longer than a regular filter.
CTO - 5 Micron Carbon Filter
Made of shell carbon which removes odours, residual chlorine, and THMs which are a byproduct of chlorine treatment.
Iodine value of 500mg/g
Additional Information
CCF - 5 Micron Coconut Carbon Block Filter
The final step in providing you with contaminant-free filtered water. This filter is made of high-quality coconut carbon in a "block" construction. The structural design provides a high chemical absorption rate. This removes any remaining chlorine, organic chemicals, unnatural tastes and odours and other chemicals found in tap water.
Iodine value of 1100-1200mg/g
All filters measure 20”h x 4.5”d
Flow rate of unit= 12000 gallons per day
Operating pressure = 60-80psi
All of our filter systems have been pre-factory tested. Filters last six months to one year on average. Replacement rate will depend on the quality of your water and usage.
Our Purewave filtration unit has a two year parts warranty and lifetime system support.
Easy to change water filters!
Suggested Install
To remove existing filters, shut off each valve on either side of the unit.
Press the red air release on the top of the unit above each filter housing before you remove each filter.
To loosen, fit the the provided spanner tool onto the cylinder housings and turn in a clockwise direction.
Use a bucket/container to catch excess water. A wet vac can also aid with excess water spillage.
For further instructions, including installation instructions, please refer to the downloadable manual below. A manual copy will be provided with every unit!
Filter Change
Click the the link below to download our installation instructions.
